Garage Door Tune-Up & Maintenance in Lummi Island, WA

Keep the photo-eye sensors clean and aligned, run the auto-reverse test with a roll of paper towel on the floor, and listen for changes in noise. Avoid spraying lubricant on the track itself — the rollers need to roll, not slide.

Yes, genuinely. A torsion spring holds enough stored energy to cause serious injury when it releases, and winding bars slip easily. This is one of the few garage door jobs where the DIY route is not worth the risk.

Look at the springs above the door — a clean gap in the coil means a broken spring and the door should not be forced. Otherwise check that the opener has power, the wall button works, the photo-eye sensors at floor level are aligned and clean, and the door is not locked or disengaged from the trolley. If the door is heavy to lift by hand, stop and call.

Once a year for a normal household. Twice a year if the door cycles more than four or five times a day, or if the garage is exposed to salt air or heavy winter damp.

We do both. That covers insulated steel, carriage house, modern flush and glass panel doors, plus belt-drive, chain-drive and wall-mount openers with Wi-Fi and battery backup. We measure, quote, install, balance and haul the old door away.

Most Lummi Island calls placed before mid-afternoon are handled the same day, and everything else is normally booked for the next morning. Our phone line at (877) 230-8949 is answered 24 hours a day, so emergency calls — a snapped spring, a door stuck open, a car trapped inside — go straight to a dispatcher rather than voicemail.